Skip to main content

iPhone 13 mini Cases in Leather & Wool Felt

No filters available

Frequently Asked Questions

Yes. Both devices are in the same size class, which is why the variant is called “iPhone 13 Mini / 12 Mini”.

No. Our CHESTER hardcase is not produced in this size. For the mini we make sleeves: KINGSTON in leather, KIRKBY in wool felt with a leather front, and SHETLAND in pure Merino wool felt.

With KINGSTON and KIRKBY, yes, both have sound holes at the lower edge. The SHETLAND in pure wool felt deliberately has no openings.

Only while you carry it. In use the phone is out of the sleeve and stays exactly as small as it is. That is the essential difference from a hardcase, which adds bulk permanently.

It is firm, and that is intended. On a small device play counts for more. After the first few weeks the felt settles against the edges and the sleeve runs more easily.

In our own workshop in Hamburg, Germany. Splitting, skiving, cutting, sewing, embossing and final inspection all happen here, and have done since 2011. The leather comes vegetable-tanned from Tuscany, and the Merino wool felt is mulesing-free.

It describes what the hide is preserved with: plant tannins from bark and wood rather than chromium salts. That takes weeks instead of hours and produces an uncoated leather that breathes and darkens over time. Our leather comes from Tuscany, where the process has been practised for centuries.

Not when dry. Vegetable-tanned leather can give off a trace when it is wet and then rubs against pale fabric. If the sleeve has been out in the rain, do not leave it to dry on a light-coloured cushion. This eases off after the first few weeks.

Both have a Merino wool felt body and a pocket at the front. The KIRKBY additionally carries a layer of Italian leather on the front and has sound holes and a charging cable cutout. The SHETLAND is pure felt, without leather and without openings, and is lighter and cheaper for it.

When dry, Merino wool felt smells neutral. When it gets wet it briefly takes on the typical wool smell, which disappears again as it dries. It is not scratchy, Merino fibres are fine, which is why they sit directly against the display.

Because the material is only part of the price. Cutting, skiving, sewing, embossing and final inspection take just as long in the mini size as in the large one, and on small parts sometimes longer, because there is less surface to guide. The only saving is on the leather itself, and that is the smaller item.

Sometimes yes. What matters is not the manufacturer but the size. Small Android devices have become rare, and many are built thicker than an iPhone 13 mini. Since we keep no measurement table for other brands, the safe route is a short message with the model name. We will tell you whether it fits.

The leather will be distinctly darker than on day one, glossy along the edges and a little softer where your thumb grips it. The wool felt will look almost unchanged, at most slightly roughened at the thumb notch. If you want a surface that stays exactly as it was when unpacked, natural materials are the wrong choice.

The variant “iPhone 13 Mini / 12 Mini”. It is named the same way on KINGSTON, KIRKBY and SHETLAND. Do not take the standard size, that is for the regular-sized devices and is far too roomy.

Yes, on the KINGSTON and in both colours. It is meant for an iPhone 13 mini that is already in a smooth, thin case. The slim fit is for the bare device.

Because we cut it ourselves. A size made in our own workshop cannot be discontinued by a supplier. Apple no longer builds new mini models, but the devices are still in use.

Yes. KINGSTON and KIRKBY have a charging cable cutout at the lower edge. With the SHETLAND you take the iPhone 13 mini out to charge it.

No. Merino wool felt is far softer than glass. The only thing that matters is that no grain of sand is sitting inside, so shake the sleeve out now and then.

KIRKBY and KINGSTON come in a fine rigid box with a lift-off lid and a silver ribbon across it. We emboss the silver logo onto the lid ourselves, with heat and pressure.

Because more raw material and more work go into leather. We buy whole hides, split them to the thickness we need and skive the edges so the seam stays flat. Not every part of a hide is usable, scars and thin areas end up as waste. Wool felt arrives as an even roll and can be cut with almost no loss.

No. KINGSTON, KIRKBY and SHETLAND get by without magnets and without metal parts that could touch the iPhone 13 mini. A sleeve needs no closure, because the fit holds it. So nothing magnetic sits against a card in the front pocket either.

No, and we do not claim it is. Leather and wool felt take a rain shower and dry again, but they are not a barrier. If you regularly take your iPhone 13 mini into wet places, you need a different tool for that.

A folio case stays on the device and folds a cover over the screen. It adds bulk permanently, and on a mini that is especially noticeable. A sleeve stays in your bag while you use the phone, the device sits bare in your hand, and there is no hinge that can wear out.

Yes. The front pocket is scaled with the rest, so a card in standard credit-card format or a folded banknote fits. Do not force in more than one card, otherwise the sleeve loses its flat line and the device no longer sits cleanly.

The honest answer: it depends on how you use it. What ages first is not the seam but the surface, on leather as patina, on wool felt as a slight roughening at the thumb notch. Neither is a defect, both are use. Because we make to size classes rather than model names, a sleeve usually outlives the device it was bought for.

Because we work with two natural materials that will not take just any colour. Vegetable-tanned leather can be dyed in dark and light browns without coating the surface. We carry the wool felt in anthracite, red and white. Bright colours would either require a coating or fade after a short time.

Write to us with a photo. We sew in Hamburg ourselves, so we can look at a seam and tell you what can be done. And if a sleeve does not fit when you unpack it, the 30-day right of return applies.

iPhone 13 mini case: hardcase or sleeve?

Anyone using an iPhone 13 mini chose a small phone on purpose and usually wants to keep it exactly that way. So the question about a case is different here than with the large models: anything that adds bulk takes away the very quality you bought the device for.

A hardcase clamps around the device and makes it permanently thicker. A sleeve holds the iPhone 13 mini only while you carry it, and in your hand it stays as small as it is. For this size we make sleeves. Our CHESTER hardcase is not produced for the mini. The table shows both principles side by side.

Hardcase (not made for the mini)Sleeve: KINGSTON, KIRKBY, SHETLAND
PrincipleStays on the deviceYou take the device out to use it
Size in the handThe mini becomes noticeably biggerThe mini stays mini
One-handed useSuffers, your thumb reaches lessUnchanged
MaterialPlastic, silicone or leather over a hard shellMerino wool felt and vegetable-tanned cowhide leather
ChargingWireless with the case onCharging cable cutout on KIRKBY and KINGSTON
AvailabilityHardly produced new for mini modelsA dedicated mini size, permanently in the range
Who it is forPeople who use the phone often and quicklyPeople who put it away and protect it

How it fits: leather and wool felt on video

Two short clips from the workshop. They show the KINGSTON in full leather and the KIRKBY in Merino wool felt with a leather front in the larger fit. The construction is identical in the mini size, only the pattern is smaller.

KINGSTON in leather – full leather outside, contrast stitching, Merino wool felt inside
KIRKBY in Merino wool felt and leather – outer pocket, sound holes, charging cable cutout

Why there is hardly anything left for small iPhones

Apple did not continue the mini line after the iPhone 13 mini. For the accessory trade that means no successor, no new volumes, no new moulds. What is left on the shelves are remainders and stock nobody looks after any more. Anyone searching today for a decent case for an iPhone 13 mini notices that immediately.

With us the mini size is a separate, permanently listed variant. It is called “iPhone 13 Mini / 12 Mini” and exists for all three models on this page. We keep it not because it sells best, but because a size we cut ourselves cannot be discontinued by a supplier. As long as there are people with small iPhones, the size stays.

Leather sleeve for the iPhone 13 mini: KINGSTON

The KINGSTON is the sleeve made of full leather. Vegetable-tanned cowhide leather from Tuscany on the outside, just under 2 mm thick, and 3 mm Merino wool felt inside. In the mini size that makes for a very compact object that fits into almost any trouser pocket, including the front one.

It comes in dark brown and light brown. The contrast stitching is the only decorative element, the sound holes and the charging cable cutout sit at the bottom, the thumb notch at the top. And it is the only model in our range made in two widths, in the mini size as well: slim for the bare iPhone 13 mini, wide for one that is already in a thin case.

KIRKBY: wool felt, leather and a pocket for a card

The KIRKBY has a Merino wool felt body and an Italian leather front with a flat pocket for a card, a folded banknote or a ticket. It comes in dark grey-dark brown and light grey-light brown, with sound holes, a charging cable cutout and a thumb notch.

With the mini this arithmetic works out particularly well. A small phone with a card on the outside replaces the whole wallet for short trips, and the entire package stays smaller than a large iPhone on its own.

SHETLAND: pure Merino wool felt

The SHETLAND is made entirely of Merino wool felt, 100 percent virgin wool, in anthracite, red or white. A pocket at the front, a thumb notch at the top, nothing else. No sound holes, no charging cable cutout, no leather.

In the mini size it is the lightest sleeve we make, and the cheapest. If you carry your iPhone 13 mini in a jacket pocket and take it out for every call anyway, you do not need more. The felt cushions, and it is soft enough not to abrade the display as the phone slides in.

ModelMaterialFeaturesColoursFit
SHETLANDMerino wool feltFront pocket, thumb notchAnthracite, red, whiteslim only
KIRKBYMerino wool felt with leatherOuter pocket, thumb notch, sound holes, charging cable cutoutDark grey-dark brown, light grey-light brownslim only
KINGSTONLeather with Merino wool feltSound holes, charging cable cutout, contrast stitchingDark brown, light brownslim and wide

Which size to select for the iPhone 13 mini

Here the choice is clearer than for any other model: the iPhone 13 mini has a size of its own, and it is named the same way across all three models.

ModelThe variant you select
KINGSTONiPhone 13 Mini / 12 Mini
KIRKBYiPhone 13 Mini / 12 Mini
SHETLANDiPhone 13 Mini / 12 Mini

The most common mistake here is picking the standard size. Variants with “iPhone 17/16e/16/Pro + ältere” in the name are for the regular-sized devices. An iPhone 13 mini would have so much room inside that it could slide out when you bend down. The mini size also fits the iPhone 12 mini, both devices are in the same class.

Sound holes, charging cable cutout, thumb notch

Three cutouts that make the difference on a small device too. KIRKBY and KINGSTON have all three, the SHETLAND only the thumb notch.

  • Sound holes. The speaker stays open, so you hear the ringtone while the iPhone 13 mini is in the sleeve.
  • Charging cable cutout. Plug the cable in without taking the device out. With the mini and its smaller battery, this is the most used cutout of all.
  • Thumb notch at the top. A cutout where your thumb finds grip. On a small device it matters even more, because less of the phone protrudes to hold on to.

The wide fit: iPhone 13 mini with a case inside the sleeve

The KINGSTON in the wide fit exists for the mini size too, in both colours. That is unusual, which is why we say it plainly here: many iPhone 13 mini have been in a thin clear case or silicone case for years, one nobody wants to remove because everything underneath is still intact.

The wide fit takes exactly such a device. The case stays on the phone and catches what happens while you use it. The sleeve goes over it while you carry the phone and catches what happens in your bag.

Slim is for the bare iPhone 13 mini, wide for one in a smooth, thin case. Chunky outdoor cases with rubber edges do not fit even the wide variant, they catch on the felt.

Leather or wool felt, how to decide

The question is not which is better, but what the sleeve should be in a few years.

Leather ages visibly. It darkens, picks up a sheen along the edges and keeps the traces of use. Mechanically it takes more than felt. For a device you intend to keep, and that is nearly always true of mini owners, that is a strong argument.

Merino wool felt hardly changes in appearance, is lighter, softer and cheaper. With the mini the weight counts double, because the whole package is meant to stay small and light. In anthracite the felt picks up pale lint, which a clothes brush solves in seconds.

Why a small phone needs a sleeve in particular

An iPhone 13 mini goes into a trouser pocket more often than a large device, simply because it fits. But that is also where the keys and the coins are. The typical scratches on a mini do not come from drops, they come from that shared pocket.

A second point: small devices slip out of the hand more easily, because there is less surface to grip. A sleeve changes nothing about that while you use the phone, since the phone is out, but it does keep the edges that help you grip it intact rather than letting them go dull over time.

Why a sleeve has to sit tightly

On a small device every millimetre of play counts for more. So we cut the mini size just as tightly as the large ones, rather than “a bit roomier to be safe”. A new KINGSTON or KIRKBY feels firm for the first few days, and that is the state we want.

After the first weeks the felt settles against the edges and the sleeve runs noticeably more easily. From then on it stays that way. That tolerance comes from the cut and cannot be bought in.

Care and packaging

Leather needs as little as possible. Remove dust with a dry, soft cloth. If it gets wet, dab it, do not rub, and let it dry at room temperature, not on a radiator. Vegetable-tanned leather is uncoated, it takes on what happens and turns it into patina.

Shake out the wool felt and brush it with a soft clothes brush. Dab out stains with clear water, without rubbing, and never put it in the washing machine.

KIRKBY and KINGSTON come in a fine rigid box with a lift-off lid and a silver ribbon across it. We emboss the silver logo onto the lid ourselves, with heat and pressure.

KINGSTON iPhone sleeve in leather with a thumb notch at the top and sound holes at the bottom KIRKBY iPhone sleeve in wool felt and leather with a front pocket for cards SHETLAND iPhone sleeve in Merino wool felt in dark grey with a front pocket
From our workshop

From the raw hide to the last stitch

Splitting, skiving, cutting, sewing, embossing, hardware and final inspection all happen in our own workshop in Hamburg, Germany, and have done since 2011.

Because we cut the patterns ourselves, we decide which sizes stay available. That is exactly why we still carry the mini size, even though Apple no longer builds new mini models.

SEE OUR WORKSHOP AND OUR STORY →
4.85 ★from 1,503 reviews
Vegetable-tanned cowhide leather from Tuscany
100 % Merino wool felt, virgin wool
A dedicated mini size on all three models
KINGSTON in slim and wide, mini size included
Handmade in Hamburg, Germany, since 2011
30-day right of return

Still keeping an eye on it?